Hello everyone...
I'm trying to get up a testing pbx installation. Following instructions
of what've read from the handbook and from asterisk's wiki, I wrote the
dial plan as follows:
[general]
;
;
static = yes
;[globals]
;
[default]
;
exten => 0,1,Answer()
exten => 0,2,Playback(fcopba1)
exten => 0,3,Hangup()
exten => *0,1,Answer()
exten => *0,2,Record(fcopba1:gsm)
exten => *0,3,Playback(fcopba1)
exten => *0,4,Hangup()
include => extentions
include => pasvalide
[extentions]
exten => 1001,1,Dial(SIP/sipchan1001,10)
exten => 1001,2,Voicemail(u1001)
exten => 1001,3,Hangup()
exten => 1002,1,Dial(SIP/sipchan1002,10)
exten => 1002,2,Voicemail(u1002)
exten => 1002,3,Hangup()
exten => *,1,VoicemailMain(${CALLERIDNUM})
;exten => *,1,VoicemailMain()
exten => *,2,Hangup()
[pasvalide]
exten => _.,1,Answer()
exten => _.,2,Playback(invalid)
exten => _.,3,Playback(goodbye)
exten => _.,4,Hangup()
--
When I on asterisk's CLI try 'show dialplan' command this is what I
get:
*CLI> show dialplan
[ Context 'pasvalide' created by 'pbx_config' ]
'_.' => 1. Answer() [pbx_config]
2. Playback(invalid) [pbx_config]
3. Playback(goodbye) [pbx_config]
4. Hangup() [pbx_config]
[ Context 'extentions' created by 'pbx_config' ]
'*' => 1. VoicemailMain() [pbx_config]
2. Hangup() [pbx_config]
'1001' => 1. Dial(SIP/sipchan1001|10) [pbx_config]
2. Voicemail(u1001) [pbx_config]
3. Hangup() [pbx_config]
'1002' => 1. Dial(SIP/sipchan1002|10) [pbx_config]
2. Hangup() [pbx_config]
[ Context 'default' created by 'pbx_config' ]
'*0' => 1. Answer() [pbx_config]
2. Record(fcopba1:gsm) [pbx_config]
3. Playback(fcopba1) [pbx_config]
4. Hangup() [pbx_config]
'0' => 1. Answer() [pbx_config]
2. Playback(fcopba1) [pbx_config]
3. Hangup() [pbx_config]
Include => 'extentions' [pbx_config]
Include => 'pasvalide' [pbx_config]
[ Context 'parkedcalls' created by 'res_features' ]
'700' => 1. Park() [res_features]
--
Now, when I dial from any of the ext. to '0' It actually matches the
'0', plays the goodbye message, but doesn't hangup but gets directly to
the 'pasvalide' context. Same thing happens when I dial to the ext. 1002
(the one that doesn't have voicemail), either it rings further than
10secs or it's busy, it does not hangup but gets straight to the
'pasvalide' context. As far as I understood, it should not happen, it
should go through the dialplan leaving those context included at the end
and in the orther they are included.
Am I forgetting something? Or there's something I'm just not seeing? Can
someone please tell me why it's happening?
Thanks in advanced.
Francisco Moreno
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
