The console is reporting that the TE110P gets IRQ 0 and it suggest that the MP table is faulty. Obviously the card doesn't work.
I will try the card in a single cpu box.
On Tue, 22 Mar 2005, Asterisk wrote:
Does it recognize the apic ? if not, do you run a multiprocessor kernel ?
Try a multiprocessorkernel if you not run one already. it solved my apic problems
Andre ----- Oorspronkelijk Bericht ----- ONDERWERP:�[Asterisk-Users] IRQ headaches AFZENDER: �Brett, Gary AAN:�"'Asterisk Users Mailing List - Non-Commercial Discussion'" DATUM:�22-03-2005 14:29 Excuse my ignorance here, but I am desperately trying to isolate the IRQ for my TE110P card (shown below as t1xxp) Ive gone into my bios and disabled all usb , parallel, serial and some other devices, those that I needed to keep, I have moved off of IRQ 10 and onto IRQ 5, but everytime I boot up, I get usb-uhci and ehci_hcd using IRQ 10 as well as my Digium card. Does anybody know what these are and how I can get rid of them ?
I am running on an HP Compaq D530s with Fedora Core 1, here is my [EMAIL PROTECTED] root]# cat /proc/interrupts CPU0 0: 15242 XT-PIC timer 1: 4 XT-PIC keyboard 2: 0 XT-PIC cascade 5: 3914 XT-PIC usb-uhci, usb-uhci, eth0 8: 1 XT-PIC rtc 10: 0 XT-PIC usb-uhci, ehci_hcd, t1xxp 12: 48 XT-PIC PS/2 Mouse 14: 4094 XT-PIC ide0 15: 1 XT-PIC ide1 NMI: 0 ERR: 0 Thanks and Regards Gary _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
