Nice dicussion. When replacing and old PBX system with an Asterisk, customers always wants to avoid a) replace all telephones with new software/hardware IP phones b) do a new ethernet cabling, to replace existing 1 or 2-pair cabling
So far, the only working "drop in" solution I've seen is channel-bank based, adding the "extra" cost of the E1 card to interconnect the Asterisk with the Channel Bank. So any experiences with these SIP gateways and the asterisk will be appreciated. Regarding the PCI-based high density FXS gateways (my preffered if possible), if I understand correctly, the only issue is power based because of the ring generator. Wouldn't it be possible to draw current from an external source instead of the PCI bus for that pourpose? Some high end graphic cards are doing that. Thanks. On Sun, 20 Mar 2005 18:56:03 -0800 (PST), Paul Mahler <[EMAIL PROTECTED]> wrote: > I haven't used their 24 port gateway, only the four port gateway, but they > have > been excellent. > > http://www.mediatrix.com/products_devices.php?prodid=3 > > Paul > > Paul Mahler > www.signate.com > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
