remove auth=md5 from your iax.conf and try again.
On Tue, 22 Mar 2005 21:38:15 +0100, Androtech <[EMAIL PROTECTED]> wrote: > Dear All, > I bought one IP PHONE from Integrated Networks which was showed to wiki too: > http://www.voip-info.org/tiki-index.php?page=Intergrated-Networks > I have problems with the Asterisk authentication. It does't want to LOG IN > to Asterisk; it always says "LOG ON FAILED". I'm using the IAX2 protocol and > all paramters seems to be correct. > Does somebody use the same IP PHONE with Asterisk and IAX2? Can someone tell > me the right configuration for it? > > My actual configuration is: > > locale ip: 192.168.0.75 > subnet mask: 255.255.255.0 > router ip: 192.168.0.1 > dns: 192.168.0.1 > > protocol: iax2 > service type: common > use service marked > service address: 192.168.0.1:4569 > nat trasversal: disabled > phone number: 103 > account: ipphone > pin: test > register port: 4569 > signal port:1701 > control port:1721 > rtp port:1721 > local type: auto > > the phone firmware is V.1.38.009 > > My Asterisk extension is: > > [ipphone] > type=friend > username=ipphone > secret=test > auth=md5 > host=dynamic > context=fullaccess > mailbox=103 > callerid="ipphone"<103> > > Thanks for any help > Regards, > > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
