> Ok, I just got my 8 channel setup to dial out and back in but here is the new > issue. It sill dials in fine with all the channels, but dialing out from > inside the asterisk system only works on the 1st channel of my 1st TDM400P > card. > > Now I dont have all 8 PSTN lines going into my asterisk box at this moment, > only one line for testing currently, but I should be able to plug that > one line into any of the open channels on the back of the asterisk box and > have it dial out with no problem correct? I can plug the line into any > of the channels and it will take calls into the system just fine currently, > just not call out. It will only call out if the PSTN line is plugged into the > 1st channel on the 1st card. > > I need this setup to be able to take incomming calls or send outgoing calls > on any available line at any time! Can someone clue me in? >
Just for fun, try moving the pstn line to another port on the tdm card and then stop/restart asterisk. If that doesn't prove anything, try restarting the drivers. _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
