On Tue, 29 Mar 2005 06:31:11 -0600, Jason Miller <[EMAIL PROTECTED]> wrote:
Do you remember what you actually changed to make it work cause that is the
same switch that I am dealing with myself if I am not mistaken.
Thank you, Jason Miller
From: Dave Weis <[EMAIL PROTECTED]> Reply-To: Asterisk Users Mailing List - Non-Commercial Discussion <[email protected]> Date: Tue, 29 Mar 2005 06:23:35 -0600 (CST) To: Asterisk Users Mailing List - Non-Commercial Discussion <[email protected]> Subject: Re: [Asterisk-Users] CIC Code
On Mon, 28 Mar 2005, Jason Miller wrote:Has anyone ever setup Asterisk to pass Feature Group D access while using a
CIC code for outbound calls? If so can you please email the configuration
you have done? I have tried to get this up and running but with no luck. I
have also contacted support and I cant seem to get this going.
I got it working briefly. I had to talk with the switch techs at the other
end for a couple hours and modify the source code to reformat what was
being sent down the line. Their definition of FGD and asterisk's
definition were not the same. It was a nortel DMS-100 or 250 set up for
CLASS 4.
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
1. EAEO siezes outgoing trunk
2. Carrier responds with wink-start
3. After wink, delay of 40 to 200 ms before you outpulse
If carrier requested ANI, you outpulse KP+II+ANI(10 digits)+ST, otherwise you send KP+ST
4. After customer completes dialing, EAEO outpulses KP+(0)+7/10 digits+ST
5. Carrier responds with wink
6. Carrier returns true called party answer supervision.
If you are connecting via an Access Tandem: 1st state dialing:
KP+0ZZ+XXX+ST
0ZZ=spare tandem center code XXX=dialed or presubscribed CIC
2nd state as above.
I'm not sure how Asterisk handles this but I will tak e a look.
You might request Feature Group C signaling, just to test and see if you can make it work.
It is: KP+DNIS+ST
Then if you can "talk" go back to working on the FGD.
-- James Taylor MetroTel 3505 Summerihll Road Suite 11 Texarkana, Texas 75503 903-793-1956 _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
