|
Hey everyone, I’m new to asterisk but eager to learn.
So here’s my scenario. I have an asterisk box with two digium x100p
cards. I have a POTS line connected to one of them. Basically my goal is to
have someone call into the incoming POTS line and be presented with a menu
where they would select an extension that would automatically connect them to
my cell phone. I have two phone lines and too FXO cards, but I understand that
it can be done with one line and one card using the three-way calling feature.
I have the menu system setup and it works well with the exception of transferring
or forwarding the call to my cell phone. The most success that I’ve had
is using the DTMF command and manually dialing the number. My phone rings, but
asterisk hangs up before I can answer it. I could set a timeout on it, but it
would disconnect the call after that time even if I was still on the phone. Any
help would be greatly appreciated. Here is a snipplet of my extensions.conf
file for what it’s worth: exten => 1,1,Playback(pbx-transfer)
;*****PRESS 1 TO MAKE AN APPOITMENT exten => 1,2,Goto,cellphone|s|1 [cellphone] exten => s,1,Flash exten => s,2,Dial,Zap/2/9729796243 exten => s,4,Congestion Paul |
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
