RE: [Asterisk-Users] Problems editing oh323 configuration parameters

Alex Vishnev Thu, 31 Mar 2005 04:51:04 -0800

You don’t have any codecs configured in your oh323 conf. also FastStart with H245 tunneling should be enabled to get the best call-setup out of h323.

From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Cenk Yabas
Sent: Thursday, March 31, 2005 7:18 AM
To: [email protected]
Subject: [Asterisk-Users] Problems editing oh323 configuration parameters

Checking the oh323 configuration on asterisk console gives the following result below. I'm editing the /etc/asterisk/oh323.conf file to correct the parameters, but the result doesn't change. I didn't receive any error massages during the installation of asterisk-oh323-0.7.1 channel driver. So what might be wrong?

localhost*CLI> oh323 show conf
localhost*CLI>
Configuration of OpenH323 channel driver
------------------------------------------
Version: 0.7.1
Listening on address: :1720
Gatekeeper used: Failed
FastStart/H245Tunnelling/H245inSetup: OFF/OFF/OFF
Supported formats in pref. order:
Jitter buffer limits (min/max): 20-100 ms
TCP port range: 5000 - 31000
UDP (RAS) port range: 5000 - 31000
UDP (RTP) port range: 10000 - 20000
IP Type-of-Service value: 0
User input mode: 2
Max number of inbound H.323 calls: 0
Max number of outbound H.323 calls: 0
Max number of simultaneous H.323 calls: -1
Max call rate (ingress direction): 999999.00/30

Thanks in advance for any help,

Cenk Yabas.

_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

RE: [Asterisk-Users] Problems editing oh323 configuration parameters

Reply via email to