|
Cenk, Are you sure that remote will handle H245
tunneling? If the remote does not know how to do that, you will get transport
failure. I would suggest doing FastStart instead and
see if you are getting the same results. Of course, you can verify that the
remote can handle faststart as well. Alex From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Cenk Yabas I
installed the oh323 channel driver and registered to the gate keeper
succesfully. I come
through the GK, ring the dialed number for about 0.5 seconds
and loose the line. I contacted the GK and they report that they
receive the correct dialstring to route the call but the call is ended by my
side. The
dialstring looks like this: exten
=> _.,1,Dial(OH323/${EXTEN},60,r) I use the
following channel driver: asterisk-oh323-0.7.1 openh323-Janus_patch4-src pwlib-Janus_patch4-src and the
message on asterisk console looks like this: --
Registered with gatekeeper '[EMAIL PROTECTED]'. --
Executing Dial("SIP/2000-c9fc", "OH323/0012029361212|60|r")
in new stack -- H.323
call to 0012029361212 with codec(s) g729 -- Called
0012029361212 -- H.323
call 'ip$localhost/2209' cleared, reason 8 (Transport failure) --
OH323/L2209 is circuit-busy -- Hungup
'OH323/L2209' ==
Everyone is busy/congested at this time (1:0/1/0) == Auto
fallthrough, channel 'SIP/2000-c9fc' status is 'CONGESTION' --
Executing Dial("SIP/2000-c9fc", "OH323/h|60|r") in new
stack -- H.323
call to h with codec(s) g729 -- Called
h -- Hungup
'OH323/L2210' == Spawn
extension (local, h, 1) exited non-zero on 'SIP/2000-c9fc' -- H.323
call 'ip$localhost/2210' cleared, reason 1 (Cleared by local user) My oh323
configuration: Configuration
of OpenH323 channel driver What might be the problem? |
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
