-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sean Kennedy Sent: Monday, April 04, 2005 6:40 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] Channel bank question
Hi all, Quick question regarding channel banks, I managed to confuse myself ( monday...daylight saving time...no coffee ). If I have 10 copper wires coming in from the phone company, and I want to get a channel bank that will turn those into a t1 to feed into an * box with appropriate hardware, do I want an FXS or FXO channel bank? You need a channel bank that has at least 10 or 12 FXO ports. I recommend an Adtran 750 or 850. You can get them on EBay for around $ 400 to 500. But most are pre-configured with FXS. You will need to either switch some of those card out. Then you just put in a T110p card into the asterisk. Also if you get this C/B with 12 FXO you can have the other 12 with FXS for normal analog extensions. While I'm at it: Are there specific features I should be looking for? Is there a specific company everyone's had good luck with? Any recommendations on this or otherwise? Thank you. Sean _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
