> 0: 184892 XT-PIC timer > 1: 5 XT-PIC keyboard > 2: 0 XT-PIC cascade > 8: 1 XT-PIC rtc > 11: 3585589 XT-PIC wcfxo, ztdummy, usb-uhci, eth0 > 14: 5360 XT-PIC ide0 > 15: 0 XT-PIC ide1
Eeewww... This won't give good results. You want each of your FXO to be on a unique IRQ if at all possible. I only see one card recognized above. Take a look at the document at http://asteriskdocs.org which has a good section on IRQ and Digium hardware setup for more info. You have plenty of free vectors, too. Long story short, what most people do is remove any devices that you are not using (I disabled USB, removed the sound card and a SCSI card that could have been used for an extra HD but wasn't necessary.) Not to pick on you, but you have an especially bad thing up there in that you X100 is sharing IRQ with the ethernet card, a sure recipe for disaster. Try going to BIOS setup and see what you can do about assigning or reserving, and also try changing the slot the X100 cards are in. _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
