The green light only means you can see the clock (sync) form the line and is only indicative of low level connectivity. Confirm with your pto that the circuit is activated and the signaling type. A good test to see if the line is activated is to call one of it�s DDI numbers. If the display on the mobile shows �error in connection� then this normally indicates that the line is ok, the call is getting to your equipment but there is a configuration fault. If you get NU then get PTO to check line.
Neil ________________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Timothy Potter Sent: 05 April 2005 12:04 To: [email protected] Subject: [Asterisk-Users] ISDN-30 in UK I just got my TE110P yesterday, I've got it showing a green stable light, so all installed ok and seeing BT's Network. � Can't get an outside line or get incoming. I've got 8 lines open on my ISDN30. � I would greatly appreacate it, if you could email me the configs you used to get it going. � Tim. � [EMAIL PROTECTED] _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
