> -----Original Message----- > From: [EMAIL PROTECTED] [mailto:asterisk-users- > [EMAIL PROTECTED] On Behalf Of Andre Normandin > Sent: Tuesday, April 05, 2005 4:36 AM > To: Asterisk-Users > Subject: [Asterisk-Users] WRT54GP2A-AT > > Hi, > > I've seen these Linksys wireless routers with an ATA already built in > (Both > for AT&T and Vonage) at staples. I was wondering if anybody has one, and > has been able to configure one of them for asterisk? Is the ATA portion > of > the router "locked" or can you just go into the router's webadmin pages > and > configure the ATA portion similiar to the way you configure the router > portion? > > Thanks, > - Andre > Andre,
Before you waste you time and money, consider this; 1. The ATA built into all of the Linksys voice products are simply Sipura SPA2000's, no function difference, licensed from Sipura by Cisco/Linksys. The router model just redirects 1 ethernet port to the internal SPA 2000 and hard codes QoS to that port. That is why there is only 3 Ethernet ports on the router instead of the customary Linksys 4. 2. If you really want the Linksys, you have to be an ITSP and go through the correct authorization with Linksys to buy an unprovisioned version. 3. The vonage / ATT units are locked, and I have no knowledge of anyone successfully unlocking them without the magic code. 4. Even if they could be unlocked, you are better off going legit, buy a SPA 2000 and a WRT54G, plug the spa2000 into a port on the router, and set the QoS priority on that port. Viola, you have the same functionality, with a warranty and support! _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
