Hi I'm setting this new system up for the first time and am also a new Linux user. Suse Linux 9.2 2x TDM400P cards, one with four fxo and the other with four fxs modules TE110P T1 card I downloaded and compiled zaptel and asterisk without problem, and created sample config files and then edited them to reflect what is recommended in the FAQ: http://www.digium.com/index.php?menu=faq#Configuration_0 When I try to insert zaptel I get: zaptel: unsupported module, tainting kernel. Zapata Telephony Interface Registered on major 196 wct1xxp: unsupported module, tainting kernel. wct1xxp: disagrees about version of symbol zt_receive wct1xxp: Unknown symbol zt_receive wct1xxp: disagrees about version of symbol zt_ec_chunk wct1xxp: Unknown symbol zt_ec_chunk wct1xxp: disagrees about version of symbol zt_transmit wct1xxp: Unknown symbol zt_transmit wct1xxp: disagrees about version of symbol zt_rbsbits wct1xxp: Unknown symbol zt_rbsbits wct1xxp: disagrees about version of symbol zt_unregister wct1xxp: Unknown symbol zt_unregister wct1xxp: disagrees about version of symbol zt_register wct1xxp: Unknown symbol zt_register wct1xxp: disagrees about version of symbol zt_alarm_notify wct1xxp: Unknown symbol zt_alarm_notify wct1xxp: unsupported module, tainting kernel. wct1xxp: disagrees about version of symbol zt_receive wct1xxp: Unknown symbol zt_receive wct1xxp: disagrees about version of symbol zt_ec_chunk wct1xxp: Unknown symbol zt_ec_chunk wct1xxp: disagrees about version of symbol zt_transmit wct1xxp: Unknown symbol zt_transmit wct1xxp: disagrees about version of symbol zt_rbsbits wct1xxp: Unknown symbol zt_rbsbits wct1xxp: disagrees about version of symbol zt_unregister wct1xxp: Unknown symbol zt_unregister wct1xxp: disagrees about version of symbol zt_register wct1xxp: Unknown symbol zt_register wct1xxp: disagrees about version of symbol zt_alarm_notify wct1xxp: Unknown symbol zt_alarm_notify Linux Kernel Card Services options: [pci] [cardbus] [pm] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex NET: Registered protocol family 17 PCI: Enabling device 0000:00:1f.5 (0004 -> 0005) ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1f.5 to 64 NET: Registered protocol family 10 Disabled Privacy Extensions on device c03c4f00(lo) IPv6 over IPv4 tunneling driver intel8x0_measure_ac97_clock: measured 49563 usecs intel8x0: clocking to 48000 ACPI: Power Button (FF) [PWRF] ACPI: Processor [CPU0] (supports C1) ACPI: Processor [CPU1] (supports C1) powernow: This module only works with AMD K7 CPUs Non-volatile memory driver v1.2 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] parport0: irq 7 detected lp0: using parport0 (polling). drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic usbcore: registered new driver usbserial_generic usbcore: registered new driver usbserial drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0 bootsplash: status on console 0 changed to on Disabled Privacy Extensions on device f70fcc00(sit0) eth0: no IPv6 routers present cdrom: open failed. end_request: I/O error, dev fd0, sector 0 cdrom: open failed. subfs: unsuccessful attempt to mount media (256) end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 subfs: unsuccessful attempt to mount media (256) cdrom: open failed. cdrom: open failed. subfs: unsuccessful attempt to mount media (256) end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 I also get these "disagrees about version of symbol" errors trying to run modprobe wcfxo and wcusb. When I try to run ztcfg I get: Zaptel Configuration ====================== SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1) Channel map: Channel 01: Individual Clear channel (Default) (Slaves: 01) Channel 02: Individual Clear channel (Default) (Slaves: 02) Channel 03: Individual Clear channel (Default) (Slaves: 03) Channel 04: Individual Clear channel (Default) (Slaves: 04) Channel 05: Individual Clear channel (Default) (Slaves: 05) Channel 06: Individual Clear channel (Default) (Slaves: 06) Channel 07: Individual Clear channel (Default) (Slaves: 07) Channel 08: Individual Clear channel (Default) (Slaves: 08) Channel 09: Individual Clear channel (Default) (Slaves: 09) Channel 10: Individual Clear channel (Default) (Slaves: 10) Channel 11: Individual Clear channel (Default) (Slaves: 11) Channel 12: Individual Clear channel (Default) (Slaves: 12) Channel 13: Individual Clear channel (Default) (Slaves: 13) Channel 14: Individual Clear channel (Default) (Slaves: 14) Channel 15: Individual Clear channel (Default) (Slaves: 15) Channel 16: Individual Clear channel (Default) (Slaves: 16) Channel 17: Individual Clear channel (Default) (Slaves: 17) Channel 18: Individual Clear channel (Default) (Slaves: 18) Channel 19: Individual Clear channel (Default) (Slaves: 19) Channel 20: Individual Clear channel (Default) (Slaves: 20) Channel 21: Individual Clear channel (Default) (Slaves: 21) Channel 22: Individual Clear channel (Default) (Slaves: 22) Channel 23: Individual Clear channel (Default) (Slaves: 23) Channel 24: D-channel (Default) (Slaves: 24) Channel 25: FXO Kewlstart (Default) (Slaves: 25) Channel 26: FXO Kewlstart (Default) (Slaves: 26) Channel 27: FXO Kewlstart (Default) (Slaves: 27) Channel 28: FXO Kewlstart (Default) (Slaves: 28) Channel 29: FXS Kewlstart (Default) (Slaves: 29) Channel 30: FXS Kewlstart (Default) (Slaves: 30) Channel 31: FXS Kewlstart (Default) (Slaves: 31) Channel 32: FXS Kewlstart (Default) (Slaves: 32) 32 channels configured. ZT_SPANCONFIG failed on span 1: No such device or address (6) Like I said this is all new to me so I'm not sure where to start. It looks like the modules don't match the kernel? Any ideas? Thanks, Ben _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
