According to an earlier post: The TDM card only needs the external power connector "if" fxs modules are installed. The fxo modules don't use it that power. If fxs modules are present, only the 12 volt lead is used.
Regards
Cameron
----- Original Message ----- From: Terry Wade
To: [email protected]
Sent: Tuesday, April 05, 2005 9:08 PM
Subject: [Asterisk-Users] zaptel not starting issues
Hi Guys
I have been running a test system of asterisk on a PIII 550 machine and now I want to implement it. I have a digium TDM02B card. I am running on Mandrake 10.1. I have now moved it to a PIII 1.2 backplane server and now I cant get the wcfxs module to load. I have also tried wctdm. I did all the udev mods and the install didn't have any errors. I am currently running * v1.0.7 stable.
I have googled and have not come up with anything concrete. Error is as follows: ZT_CHANCONFIG failed on channel 4: No such device or address (6). I only have 1 FXO module in at the moment, and have moved it through all the positions.
Does the card need the power in the back to correctly start it?
Kind Regards
Terry Wade Mobile: +27 82 802-5750 Office: +27 11 784-7642 Fax: +27 11 388-0855
Disclaimer and Confidentiality Warning
This message is intended for the addressee only. If you are not the intended recipient of this message, you are notified that any distribution, use of or copying of this communication is strictly prohibited. If you have received the communication in error, please notify the sender immediately. The views and opinions expressed in this message are those of the individual sender of this message and do not necessarily represent the views and opinions of ActiCom. Consequently, ActiCom does not accept responsibility for such views and opinions and this message should not be read as representing the views and opinions of ActiCom without subsequent written confirmation. Each page attached hereto must also be read in conjunction with this disclaimer.
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
