> -----Original Message----- > From: [EMAIL PROTECTED] [mailto:asterisk-users- > [EMAIL PROTECTED] On Behalf Of Stefan Tichy > Sent: Tuesday, April 05, 2005 11:19 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: [Asterisk-Users] Re: mISDN + chan_misdn and DTMF > > On Mon, Apr 04, 2005 at 07:46:49PM +0200, Alex wrote: > > Asterisk CVS-HEAD 30/3/05 + mISDN + chan_misdn = everything works fine > but > > outgoing DTMFs are not sent to the called party when placing calls from > SIP > > clients to PSTN (ISDN). On the contrary, incoming calls from PSTN can > send > > DTMF to Asterisk. > > I've already tried every combinations of dtmfmode (inband, rfc2833, > info) > > either in sip.conf, either in clients options, with all codecs. I've > also > > tried setting SIPDtmfMode() before dialing, but had no success. > > "Turn on inband DTMF on your SIP device, this works." > (copied from http://www.beronet.com/bugs/ bug_id 10 ) > > Is the problem specific to CVS-HEAD 30/3/05 ? If you think it is a > chan_misdn problem, please use beronets bug tracker.
I didn't know if it was specific to beronet's chan_misdn or it was a general issue, and that's why I asked here on the list before saying that's was a bug for sure. However, I've just had a look to your link (I had already looked at beronet's buglist, but because of a filter applied on search results I didn't noticed that bug :( ) and you're right, that's a chan_misdn "feature". Thanks, Alex _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
