Are these the same as YUXIN phones sold by eezeePhone.com? Do they have PA1688 Chipset?
This does not look like a problem of the phones, but something to do with Asterisk Dial plan. Are you using 'Answer' or 'Dial' command? 1)If you are usind Dial command, do not use T or t flags 2)DTMF mode Inband works only for Ulaw. If You use any other codecs, use RFC2833 Seshu -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ian Pattison Sent: Wednesday, April 06, 2005 1:34 PM To: [email protected] Subject: [Asterisk-Users] Keypad disabled on AriaVoice SIP phone Hi All, I've got a couple of AriaVoice C-301P SIP phones connecting to * and have a bit of a problem. I can dial out with no problem but once * bridges the call to another channel (such as a Zap channel to the PSTN or an internal Analog phone) it appears that the keypad is then disabled which keeps me from navigating other peoples IVR trees. I've seen some ramblings on DTMF relay (usually when applied to Cisco products) but don't know if that's my issue at all. I've tried both RFC2833 and Inband Audio for DTMF handling with identical results. It literally appears that the keypad is being disabled after dialling. I've attempted to contact the vendor of the phones several times and have been unsuccessful in reaching anyone. Anyone had a similar experience? A snapshot of the phone's config can be seen at http://www.technologyassociates.ca/phone.jpg Thanks, Ian Ian Pattison, Senior Analyst Technology Associates Inc. Tel: 905-459-2100 ext. 204 Mobile: 416-568-6548 E-mail: [EMAIL PROTECTED] -------------------------------------------------------- NOTICE: If received in error, please destroy and notify sender. Sender does not waive confidentiality or privilege, and use is prohibited. _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
