A too-high or too-low rxgain setting for the analog channel in question (in zapata.conf) can cause DTMF digits not to register as such.
On Apr 8, 2005 12:38 PM, Jerry Geis <[EMAIL PROTECTED]> wrote: > I have a box. 3GIG P4, 1 TDM02B card , 1 GIG ram only running asterisk > at this time. > it has SATA drives. the wctdm is on its own interrupt and yet sometimes it > misses DTMF keys. What else might be the situation? It is not running X. > > It is conneted to broadvoice. However, I have another box that uses > broadvoice > also and it is fine. > > The wctdm card is not doing anything yet. the calls are all VOIP. > > Thanks for any suggestions. > > Jerry > > CPU0 CPU1 > 0: 1085098124 1085018504 IO-APIC-edge timer > 8: 13 14 IO-APIC-edge rtc > 9: 0 0 IO-APIC-level acpi > 15: 9762666 9760642 IO-APIC-edge ide1 > 169: 0 0 IO-APIC-level uhci_hcd, uhci_hcd > 177: 0 0 IO-APIC-level uhci_hcd > 185: 7042068 7022425 IO-APIC-level libata, uhci_hcd > 193: 0 0 IO-APIC-level ehci_hcd > 201: 25999635 0 IO-APIC-level Intel ICH5, eth1 > 209: 1085068867 1085049714 IO-APIC-level wctdm > 217: 158 22365475 IO-APIC-level eth0 > NMI: 0 0 > LOC: 2170264479 2170264478 > ERR: 3 > MIS: 0 > > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
