I have a similar situation but it seems to vary from call to call sometimes.
Using 2 digium genuine x100p's in a dell with riser card. I'm wondering if it is something to do with the riser because it doesn't seem to matter if I swap various cords, positions, etc. Cheers, Dean > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:asterisk-users- > [EMAIL PROTECTED] On Behalf Of Stuart Ford > Sent: Saturday, April 09, 2005 9:57 AM > To: 'Asterisk Users Mailing List - Non-Commercial Discussion' > Subject: [Asterisk-Users] Terrible crackling on analogue line and X100P > card > > Dear all ... > > I'm experiencing terrible trouble with crackling and noise on an > analogue line connected to an X100P (compatible) card. I've checked the > line with a normal analogue phone and it works fine, clear as a bell, > but any outgoing or incoming calls to Asterisk are almost completely > drowned out by loud crackling. > > I've attempted to adjust the RX and TX gains, but to no avail. There's > also an echo, but only one way. I'm assuming this is a separate issue so > I've not done much to investigate that, but I may be wrong so if it is > related does anyone have any suggestions? > > I never had this trouble with ISDN, but then I wouldn't would I? :) > > If anyone can wave a magic wand, or at the very least point me to a > website where I can get my own magic wand, please let me know. > > Thanks > > Stuart > > > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
