There is very little difference between configuring a static IP or DHCP. You need the basic 3 things like the IP address, Sub net mask, and Gateway address. For DNS use the dns servers address's supplied by you ISP. Make sure you turn on the use DNS setting in the Sipura unless you use IP address only. A sip registration failure can be many things. Your Service provider should have given you basic settings. Any one of them can be typed in wrong. You must go over each setting. A common failure is the auth. password. Also make sure you use a stun server. Even if the IP is public, It doesn't hurt anything to use it. Most of the time stun servers use port 3478. So your entry should be ip-address:3478

I hope this helps a little

Mike

Jerry wrote:

OK so now you have an IP address. Did you login and configure the Sipura?

On Apr 7, 2005, at 1:04 AM, Rich Adamson wrote:

I wish to configure my Sipura with static IP. I have set the static

IP, but there is registration failure on doing so. Could you please

tell me how do I go about configuring my Sipura for static IP and register it successfully

with the Asterisk server.



A few of the spa changes require the box be rebooted. Did you do that?

Can you ping the sipura's ip address?


_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users



_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users



_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to