Keep on bugging the Sangoma guys, I know they are working on several RBS T1 issues right now(They called me Friday to go over a few things) They just need help from users like you and I to find the bugs in their drivers.
Have you tried any other signalling types other than LOOP? MATT--- -----Original Message----- From: Felician CHELU [mailto:[EMAIL PROTECTED] Sent: Monday, April 11, 2005 9:52 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] Sangoma A101 + Rhino channelbank Hello, I have Asterisk 1.0.6 - I try to setup Sangoma A101 T1 board together with the Rhino fxs chanelbank. Things done: - T1 cross cable = I have carrier, signalling and framnig leds on the channelbank green. - channelbank configuration: t1 - Proto: LOOP Frame: esf Clock: slave Coding: b8zs channels(analog) : Function:A-fxs Mode:loop - zaptel.conf span=2,1,0,esf,b8zs fxols=32-55 (i have a span 1 with a digium e1) - zapata.conf .... signalling=fxo_ls - wanpipe1.conf [devices] wanpipe1 = WAN_AFT, Comment [interfaces] w1g1 = wanpipe1, , TDM_VOICE, Comment [wanpipe1] CARD_TYPE = AFT S514CPU = A CommPort = PRI AUTO_PCISLOT = NO PCISLOT = 10 PCIBUS = 2 FE_MEDIA = T1 FE_LCODE = B8ZS FE_FRAME = ESF FE_LINE = 1 TE_CLOCK = MASTER ACTIVE_CH = ALL TE_HIGHIMPEDANCE = NO LBO = 0DB INTERFACE = V35 CLOCKING = EXTERNAL BaudRate = 0 MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO [w1g1] PROTOCOL = HDLC HDLC_STREAMING = YES ACTIVE_CH = ALL IDLE_FLAG = 0x7E MTU = 1500 MRU = 1500 TDMV_SPAN = 2 TDMV_ECHO_OFF = NO MULTICAST = NO TRUE_ENCODING_TYPE = NO I already called Sangoma and Rhino support, but after hours of long distance call conversation the problem is still not solved. Finnaly, a guy from Rhino told me that their "asterisk expert" (which was not avaliable) knows about this problem and that it is that the sangoma driver is not communicating with asterisk. The wanrouter starts ok, after ztcfg I see the channels configured. The problem: i don't have dialtone on phones. Question: When i enter zttoll, if i go to the sangoma span and I make "loop" then it freezes. Is it normal? If someone has experienced this combination and made it work please give me a sign. Thank you. PS: Felician _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
