In article <[EMAIL PROTECTED]>, Henry Jensen <[EMAIL PROTECTED]> wrote: > On Tue, Apr 12, 2005 at 12:23:52PM +0000, Tony Mountifield wrote: > > In article <[EMAIL PROTECTED]>, > > Henry Jensen <[EMAIL PROTECTED]> wrote: > > > > > > Is there any way I can switch the TE110P card to NT-Mode ? > > > > In /etc/asterisk/zapata.conf, change signalling=pri_cpe > > to signalling=pri_net > > > Wait a minute, you are saying, that pri_net is setting the card to NT mode? > > AFAIK NT mode must be set somewhere in the hardware configuration (e. g. when > loading the > kernel module - see http://www.voip-info.org/wiki-Asterisk+zaphfc). > > Nevertheless, I tried this already, the HiPath still says that it receives > no signal and gives me a yellow alarm in zttool.
Sorry, I must have misunderstood. I thought you meant you wanted the card to behave as a switch rather than as a CPE. Perhaps instead, or as well, you need to use a crossover cable. That's what I have to use in order to connect one card port to another for testing. See http://www.voip-info.org/wiki-crossover+T1+cable Cheers Tony -- Tony Mountifield Work: [EMAIL PROTECTED] - http://www.softins.co.uk Play: [EMAIL PROTECTED] - http://tony.mountifield.org _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
