I don't see why it bothers you what channel name it checks, you didn't
mention if it works or not, so I'm asking you does it work? is the
second call pushed down to priority 206?
On 4/11/05, Ronald Wiplinger <[EMAIL PROTECTED]> wrote:
> I have some troubles to use Setgroup / Checkgroup!!!
>
> I setup a test (NoOP's are deleted): First caller should get first line,
> second caller should get second line, third caller should get busy and
> send an email. Note, that I used twice here to check the first line!!!
>
> [trunkint_A]
>
> exten => _90NZZZZ.,104,SetGroup(sip-13) ; increase Group counter
> exten => _90NZZZZ.,105,CheckGroup(1) ; check no more than 1
> in this group
> exten => _90NZZZZ.,106,NoOp(Line 106)
> exten => _90NZZZZ.,107,Dial(SIP/${EXTEN:[EMAIL PROTECTED])
> exten => _90NZZZZ.,108,hangup
> ;
> exten => _90NZZZZ.,206,SetGroup(sip-12)
> exten => _90NZZZZ.,207,CheckGroup(1)
> exten => _90NZZZZ.,208,NoOp(Line 208)
> exten => _90NZZZZ.,209,Dial(SIP/${EXTEN:[EMAIL PROTECTED])
> exten => _90NZZZZ.,210,hangup
> ;
> exten => _90NZZZZ.,308,SetGroup(sip-13)
> exten => _90NZZZZ.,309,CheckGroup(1)
> exten => _90NZZZZ.,310,NoOp(Line 310)
> exten => _90NZZZZ.,311,Dial(SIP/${EXTEN:[EMAIL PROTECTED])
> exten => _90NZZZZ.,312,hangup
> ;
> exten => _90NZZZZ.,410,Busy
> exten => _90NZZZZ.,411,SYSTEM(mail -s 'VPBX all lines in use'
> [EMAIL PROTECTED])
>
> I thought that 104 will set the Group counter "sip-13" to "1" and will
> use line 107 for the dial command
> If another caller comes in that way, "sip-13" would be "2" and because
> Checkgroup allows only "1", the Group coutner would be setback to "1"
> and it will follow the jump to 206 and sets the Group counter "sip-12"
> to "1"
> A third call should now find Group counter sip-12 and sip-13 set to "1"
> and give a busy signal and send an email.
>
> HOWEVER, the log file show:
> -- Executing SetGroup("Local/[EMAIL PROTECTED],2", "sip-13")
> in new stack
> -- Executing CheckGroup("Local/[EMAIL PROTECTED],2", "1") in
> new stack
> -- Executing NoOp("Local/[EMAIL PROTECTED],2", "Line 106")
> in new stack
> -- Executing Dial("Local/[EMAIL PROTECTED],2",
> "SIP/[EMAIL PROTECTED]") in new stack
> -- Called [EMAIL PROTECTED]
>
> so far so good!
>
> -- Executing SetGroup("SIP/615-92c3", "sip-13") in new stack
> -- Executing CheckGroup("SIP/615-92c3", "1") in new stack
> -- Executing NoOp("SIP/615-92c3", "Line 106") in new stack
> -- Executing Dial("SIP/615-92c3", "SIP/[EMAIL PROTECTED]") in new stack
> -- Called [EMAIL PROTECTED]
>
> Ahh, it does not check Group counter sip-13, ... it checks SIP/615-92c3
> and Local/[EMAIL PROTECTED],2
>
> How can I make it that it checks exactly the Group counter sip-13 ????
>
> bye
>
> Ronald
>
> _______________________________________________
> Asterisk-Users mailing list
> [email protected]
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
