Greg, Eicon gave me two resellers: Alternative Tech 800 544-7674 Aliance Systems 800 977-1010
I don't believe I called either as the cards were too expensive. Go ahead and give Eicon a call. They were helpful with me and knew something about Asterisk. Brian On Tue, 2005-04-12 at 23:54, Gregory Wiktor - ADCom Corp. wrote: > Brian, > If you spoke to eicon, any idea if they have some pci cards laying > around? They seem impossible to find on resellers. > > Server is great probably, but the price is too steep. Its almost easier > to use zaptel analogs tied into a normal isdn modem, except then there > are no features. > > Regards, > Greg > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Brian G > Sent: Thursday, April 07, 2005 9:47 AM > To: [email protected] > Subject: Re: [Asterisk-Users] Any success with BRI in the US? > > Patrick, I looked into this for a client in MA a couple of weeks ago. I > called Eicon, and Adtran and did quite a bit of googling and emailing. > The only card that I had confidence in was the Eicon Diva Server Cards > at $922US for a single BRI. Eicon says this will work and others seem > to have it working. Junghanns told me in an email that their card would > work but they don't know of a driver that will work in the US. > > The cheap alternative was to use an Adtran Express 3000 to convert to > POTS and then feed a Digium TDM card. The 3000 can be found pretty > cheap. This was a little to much of a kludge for me :-) > > There are other products like the Patton SN1200 that provide a SIP or > H.323 to BRI gateway at about $700US. This looks like the best solution > but I didn't get very far. My client is going to stick with his ISDN > phones until he can replace his whole calling system. > > email me off list if you'd like more info. > > Brian G. > > > On Wed, 2005-04-06 at 13:00, Patrick Conroy wrote: > > Hello all, > > > > I have noticed a few people have mentioned recently that they are > > looking to set up BRI in the US. I am looking to do the same and I am > > > wondering if anyone has had any success yet? And, if so what card are > > > you using? I have heard that the Eicon Diva Server boards work, but > > they are a little out of my price range at the moment. Since > > isdn4linux supports NI-1 (from what I have been reading) would any of > > the passive BRI cards like the Fritz work? Also, are there any boards > > > with U interface to avoid using an NT1 along with it? Even the Eicon > > Diva Server boards all seem to have the S/T interface. Any > > information would be helpful. > > > > Thanks, > > Patrick > > _______________________________________________ > > Asterisk-Users mailing list > > [email protected] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
