Couple of things I noticed:
Dunno why you'd have s extension in [voip-h323] context.
Format of Dial command seems wrong
Try putting the specific number you dial in extensions.conf e.g.
exten => 02077777777,1,Dial(Zap/1/02077777777)
exten => _9X.,1,Dial(Zap/1/${EXTEN:1})Then dial 02077777777 and watch what happens on the CLI.
Regards
Cameron
----- Original Message ----- From: "Iain Young" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Monday, April 11, 2005 2:49 AM
Subject: [Asterisk-Users] UK PSTN Calling From OH323 Problem
Hi All,
I'm just starting with Asterisk, so this may be something very simple. I'm using a X100P, and a softphone (GnomeMeeting) with OH323 providing the linkage into Asterisk. The (very) simple setup looks like this:
PSTN---X100P----Asterisk---OH323 GateKeeper---GnomeMeeting (zap channel) (OH323 Channel)
I'm slowly working thru my own Dial Plan, bit by bit. I finally got my head around the concepts and theory of extensions.conf, but found the supplied file rather complex and confusing.
So, in order to test my understanding, and actually get some experience of writing it myself, I started from a clean sheet of paper.
I've sorted incoming calls from the POTS line, so they get sent to the softphone. But I'm having difficulty getting outbound calls to the PSTN line from the softphone to work correctly.
extensions.conf contains the following:
---BEGIN INCLUDE FILE--- [general] static=no writeprotect=yes
[global] RINGTIME=>3 POTSOUT=>Zap/1
[default] exten => s,1,Wait,1 exten => s,2,Answer ; Answer The Incoming Call exten => s,3,Dial,OH323/iain ; Transfer to the SoftPhone exten => s,4,HangUp ; Hang Up
[voip-h323]
exten => s,1,Wait,1
exten => s,2,Answer ; Answer The Incoming Call
exten => s,3,DigitTimeout,15 ; Give us time to enter the real num
exten => _9X.,1,Dial,Zap/1/${EXTEN:1} ; Try This
---END INCLUDE FILE---
So, What I was hoping this would do, is dialing 9 followed by a number, would send the call out the POTS line. Well it sorta works.
If I dial (from the softphone) 91471 (1471 is the number you call in the UK to see who called your POTS line last), it works (seems to take an age to dial, and connect, but does work)
However, if I call other numbers, eg my own mobile, or another PSTN number, then although a 'show channels' shows the correct number, it never seems to reach the number that (I think) it dialed
Asterisk version is Asterisk 1.0.7-BRIstuffed-0.2.0-RC7k from Debian Sid.
Anyone have any suggestions as to what I'm doing wrong ? Is there anything specific to the UK ? Do I need to add something to ensure it knows how to dial in the UK ?
All the Best
Iain _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
