Re: [Asterisk-Users] I dont want to hear the FXS port ring - TDM400?

Thu, 14 Apr 2005 16:27:34 -0700

In your zapata.conf set usecallerid=no callwaitingcallerid=no and immediate=yes.  Remove the Wait(0)  and start your first priority with answer. 
 
----- Original Message -----
Sent: Thursday, April 14, 2005 5:25 PM
Subject: [Asterisk-Users] I dont want to hear the FXS port ring - TDM400?

Is there a way to have an FXS port not ring but just pick up? Here is what I am doing.

 

I have Mitel 200SX plugged into one of FXS ports on my TDM400 so that my Mitel users can make calls out via VoIP. Currently when I dial that Mitel extension from the Mitel, it rings the port on TDM400 and then answers, then drops to a dial tone so I can continue to dial. Preferably I would like not to hear a ring but just give me back the dial tone.  

 

Here is my code in the extensions.conf and all works great except I don�t want to hear the FXS port ring.         

 

exten => s,1,Wait(0)

exten => s,n,Answer

exten => s,n,DigitTimeout,5             ; Set Digit Timeout to 5 seconds

exten => s,n,ResponseTimeout,10         ; Set Response Timeout to 10 seconds

exten => s,n,DISA,no-password|local

 

 

_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to