The problem of Q931 SETUP I have also depends on Junghanns and they do not support in any way the products the sell...
----- Original Message ----- From: "Stefan Gofferje" <[EMAIL PROTECTED]> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <[email protected]> Sent: Friday, April 15, 2005 8:30 AM Subject: Re: [Asterisk-Users] ISDN BRI and signalling > Bob van der Moezel schrieb: > > >I want to signal BUSY condition to a bristuffed HFC-S ISDN line. > > > >However: > > "exten => s,1,Busy" has no effect, > > "exten => s,1,Playtones(Busy)" is not audable over unanswered line (I > >live in the Netherlands...) > > > >So I currently do: > >+ exten => s,1,Answer > >+ exten => s,2,Playtones(Busy) > >+ exten => s,3,Busy > >Which obviously is not an ideal solution. > > > >Is there a way to get real signalling out a bristuffed HFC-S ? > > > > > I have the same problem with a Fritz!PCI and chan_capi as external line. > I have a HFC-S card in NT mode as internal ISDN. On this card, Busy and > Congestion do work. > As both drivers came from Junghanns, I suppose, this is a problem with > the drivers... > > Regards, > Stefan > > -- > (o_ Stefan Gofferje | Linux Systems Specialist > //\ Reg'd Linux User #247167 | Network Security Specialist > V_/_ Heckler & Koch - the original point and click interface > > > _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
