Mike, Under status, what is the firmware version? You're looking for Appl Load ID, Boot Load ID and Version. Most likely you'll have to get a version 6 SIP image and then you'll be able to install the current 7.4 SIP image after that. In order to get these image files, you have to be a contract paying Cisco client to download them from Cisco's site. I just went through this on my 3 7940s, but I have them all converted over to SIP.
You also need to run a TFTP server. I used Cisco's old TFTP program on my Windows XP Pro box. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of mk111 Sent: Thursday, April 14, 2005 9:31 PM To: [email protected] Subject: [Asterisk-Users] cisco 7960 SIP setup I can't get the 7960 to reconfigure and work. I am a newbie to voip. I went through the list and read some other comments about the 7960 and unlocking it. It is a used 7960 that came with CallManager. I need to have SIP. I first reset the phone to factory defaults then I changed the TFTP server address in the settings. I have unlocked the phone with **# and it shows the lock as unlocked in the upper right hand corner. I was told that the phone should be able to download the SIP... file once the TFTP address was changed. So far nothing though. Any ideas? Mike _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
