It can be that you need power on your ISDN bus.
I had this problem with a SIEMENS 3070 connected to a HFC-S card in NT mode.
I have just added an ISDN NT to power the bus:
just follow the instructions here:
http://home.foni.net/~jolly1/download/PBX4Linux-2.5.html
2.2 Connect ISDN telephones to your ISDN card.
Le 15 avr. 05, � 22:18, Gavin Hamill a �crit :
On Friday 15 April 2005 18:28, Rob Scott wrote:If you your board into an ISDN wall socket and it works then you are acting as a terminal so you are in terminal mode.
Now, how are you connecting to the PBX? If you are connecting to an ISDN extension on the PBX, then still you have to match the kind of connection, whether it is point-2-point or point-2-multipoint. Then it should work.
Thanks for the suggestion, I'm happy with the ISDN cabling of straight through
versus 3/4 and 5/6 crossed, and understand the differences in PTMP and PTP
and also know what I should be configuring...
TE mode on one port works perfectly, NT mode on another port doesn't =)
From the advice I've been taking, I'm now quite convinced this problem is
simply due to the lack of termination so I'll have to get some resistors and
see what happens :)
Cheers, Gavin. _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Olivier MONNET Altiva Solutions +33 476525611 Fax: +33 476525612 http://www.altiva.fr
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
