I have
successfully installed and configured a WCTE11XP card to connect with a voice
switch (Cisco VCO/4K). Also, I have the SIP connection working as well, where a
call from the voice switch properly transfers to the SIP
phone.
The
voice switch is normally set up for E&M and I have the WCTE11XP card setup
for E&M (wink in the zaptel.conf; e&m in
zapata.conf).
The
cards communicate fine with no carrier failure or alarms on either side and the
calls go through. The problem is that I run into sporadic issues where the call
does not complete to the SIP phone in some instances. The voice switch shows a
recorded message - presumably an * message that the extension is not
available.
Does
anyone know where to see detailed logs for both the ZAP card and *. The
/var/log/asterisk/messages file is a good source for the * side - but is there
anything else.
I
would love to enable logging for each of the channels on the ZAP card - that is
my goal.
The zt
tools (ztmonitor, zttools, etc.) do not seem to give enough
info.
Any
help is appreciated.
If
this is the wrong listing, please advise.
Thank
you.
No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.9.11 - Release Date: 4/14/2005
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
