Inline... > Hi, I did not find any useful information to configure a Wildcard > TDM400P with a FXO card. I've tried everithing, I tried configure it > using the cvs and the information from digium page, I tried to > configure it using > debian packages, I tried to configure with kernels 2.4.30 and 2.6.11, I even > switched the mother board (I tried 3 motherboards). > > I tanks in advace any help you could give me. > > Best Regards, > Gregorio Toscano > [EMAIL PROTECTED] > > The erros are: > > Apr 15 16:08:37 WARNING[1468]: chan_zap.c:850 zt_open: Unable to > specify channel 1: No such device > Apr 15 16:08:37 ERROR[1468]: chan_zap.c:6458 mkintf: Unable to open > channel 1: No such device > here = 0, tmp->channel = 1, channel = 1 > Apr 15 16:08:37 ERROR[1468]: chan_zap.c:9558 setup_zap: Unable to > register channel '1' > > My configuration files are: > > lsmod > Module Size Used by Not tainted > wctdm 97248 0 (unused) > zaptel 214784 0 [wctdm] > > dmesg (final): > Module 0: Not installed > Module 1: Not installed > Module 2: Not installed > Module 3: Installed -- AUTO FXO (FCC mode) > Found a Wildcard TDM: Wildcard TDM400P REV E/F (4 modules) > > najay:/etc# cat zaptel.conf > loadzone = us > defaultzone = us > fxs_ks=1 ^^^^^^ that should be fxsks (might also try fxsks=3 since your only module is #3. I don't remember how these are numbered for sure. Don't forget to run 'ztcfg -vv' after the modprobes. That should tell you which channel the fxo module is on.
> najay:/etc/asterisk# cat zapata.conf > [channels] > signalling=fxo_ks > echocancel=yes ; You can set this to 32, 64, or 128, tweak to your needs. > echocancelwhenbridged=yes > echotraining=400 ; Asterisk trains to the beginning of the call, > number is in milliseconds > callerid=asreceived > group=1 > context=default ; Points to the default context of your extensions.conf ^^^^^^^ I strongly suggest changing this to some other keyword as it appears that you're using "default" as the sip context as well, and that's going to give you fits. Try something like context=inbound-home or whatever. > channel = 1 ; Again X is the number of FXO modules you have > > najay:/etc/asterisk# cat voicemail.conf > [general] > > format=wav I assume the following is really extensions.conf (even though you didn't mention it). > [default] > 8500 => 1234,Gummer,[EMAIL PROTECTED] > > [root at fred asterisk]#cat extensions.conf > > [default] > exten => 2999,1,VoicemailMain(${CALLERIDNUM}) > exten => 0.,1,Dial(Zap/g1/${EXTEN}/20,t) > exten => s,1,Wait(1) > exten => s,2,Dial,Zap/g1 ; Dials the first available channel in group 1 > exten => s,3,Voicemail,u9000 > exten => s,4,Hangup Now you need to add this for inbound TDM calls (see above): [inbound-home] exten => s,1,Dial(SIP/8500},15) ; extn to ring when inbound call arrives. exten => s,103,Congestion > najay:/proc# cat interrupts > CPU0 > 0: 362024 XT-PIC timer > 1: 6987 XT-PIC keyboard > 2: 0 XT-PIC cascade > 10: 2792513 XT-PIC wctdm > 11: 10280 XT-PIC via82cxxx, eth0 > 12: 3653 XT-PIC PS/2 Mouse > 14: 16860 XT-PIC ide0 > NMI: 0 > ERR: 0 Interrupts look fine with wctdm card on its own. Rich _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users