All,
I've very new to * and am trying to get it up and running. I have * running on
FC3 with a TDM01A connected to my POTS line.
Asterisk loads without issue and my X-Lite phone logs in without issue. I can
dial other extensions fine. When I try to dial an outside line (with 9 first)
I get a "All circuits are busy".
ztcfg -v shows "1 Channel configured"
On the asterisk console, the failure happens after:
Executing Dial("SIP/201-0275", "ZAP/g0/6047030223") in new stack
== Everyone is busy/congested at this time
I only have 1 FXO port open, but #4 is lit up green on the back.
What can I do to troubleshoot this further? Is there a way to test my TDM01A
to ensure it's working?
If there is a wiki reference I should be reading, let me know. I'm a little
light on PBX terminology.
Thanks for any help!
-- Aaron
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
