Hi Rafa!
>Hi Jairo,
>
>Try with other values for the jitter in your Gateway
(H323).
>
>One customer have a scenario like this:
>Phone/Fax <----> Gateways H323 -with 16/8/2/1 Port
FXS- <---> GNUGK
<---> Asterisk <---> Zap (E1)
We have the same configuration, and I think that our
problem is the jitter in Asterisk, since we have
jitterMin=0ms and jitterMax=0ms. We changed
chan_oh323.c because it didn't accept jitter less than
20ms (We used Asterisk to translate SIP -->
H323-->Cisco, and the Cisco have jitter buffer, so we
didn't need jitter buffer in Asterisk).
Now, we have put:
oh323.conf --->
jitterMin=20ms
jitterMax=20ms
codec=G711A
frames=20
zapata.conf --->
jitterbuffers=20ms
but fax still doesn't work. Anyideas?
Other question.
If Asterisk hasn't T.38 then Fax will need 64Kbps
(G711)+ 16Kbps (IP+UDP+RTP) bandwidth, and that is
much bandwidth. Is this correct?, Do you know any
comercial implementation of T.38 to Asterisk?
Thanks.
______________________________________________
Renovamos el Correo Yahoo!: �250 MB GRATIS!
Nuevos servicios, m�s seguridad
http://correo.yahoo.es
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
