Terry: You'll probably want to set up an IAX2 channel between them. Here is a good place to start looking: http://www.voip-info.org/wiki-Asterisk+IAX+Channels
Also, I think this list has had a fair share of IAX2 inquiries recently. If you check the archives (http://lists.digium.com/pipermail/asterisk-users/), I think you'd find something useful. If you still have problems once you have tried Wiki and list suggestions, feel free to send a message to the list with specifics. Hope that helps, Andy On 4/21/05, Terry Bomersbach <[EMAIL PROTECTED]> wrote: > I have two Asterisk boxes installed but am not sure how to setup the > configuration for what I want to do. > > One box has two FXO cards in it that will connect two PSTN lines. I want to > have Asterisk transfer the incoming calls to the other box which has an FXS > card in it. That box should ring that call through to a handset attached to > the FXS card. > > Any advice on how to make this work would be appreciated. > > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
