> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of
> Robert Webb
> Sent: Saturday, April 23, 2005 11:42 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion;
> List Receiver
> Subject: RE: [Asterisk-Users] Cisco 7960 won't register as SIP device
>
> <SNIP>
>
> > #user_info: phone
> >
> > # SIP Configuration File (stop)
> >
> > When the phone tries to register, all I get in the Asterisk
> console is
> > this:
> >
> > Apr 23 08:22:29 NOTICE[26568]: chan_sip.c:8804
> > handle_request_register:
> > Registration from
> > '<sip:[EMAIL PROTECTED];user=phone>'
> > failed for '24.18.147.95'
>
>
> I am unfamiliar with the Cisco configs but I am just
> comparing your error message to what you have in the config
> to make this suggestion. In the error it has "user=phone" and
> in your config commented out there is
> "#user_info: phone". What if you tried uncommenting that line
> and putting in "username"? It could be that when thatline is
> commented out, it uses "phone" by default.
>
> Robert
>
Actually after getting into the Cisco site it looks like you want a
value of "none" for that.
Configures the "user=" parameter in the REGISTER message. Valid values
are:
* none-No value is inserted.
* phone-The value user=phone is inserted in the To, From, and
Contact Headers for REGISTER.
* ip-The value user=ip is inserted in the To, From, and Contact
Headers for REGISTER.
The default value is none.
It says the default value is "none" but you may want to hard code it as
it looks like that is not what it is doing.
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
