I finally figured it out ... working with BT100 you need to make a little voodoo ritual first :-) ... so follow the steps --exactly-- if you have trouble
This is my working configuration behind Linksys WRT54G router: - Upgrade firmware 1.0.5.23 - Reset BT100 to factory defaults - SIP Server: asterisk.mydomain.com - Outgoing Proxy: asterisk.mydomain.com - DTMF: SIP INFO - Reboot BTW ... this is exactly what I tried 100x before but without the exact order of steps. I think especially step #2 about resetting to factory defaults before you do any re-configuration is critical. Don't trust the web interface always start fresh. Strangely, I had no problems whenever I was behind any other router than Linksys ... didn't have to do all this voodoo stuff ... makes me uncomfortable since I feel like I'll plug the phones in tomorrow and I'll be back where I started. Maybe the secret was "not changing my underwear in the morning" :-) LOL On the Asterisk side it's just the usual: Nat = yes Qualify = yes Tomas -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tomas Florian Sent: Saturday, April 23, 2005 11:56 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] SIP registration behind Linksys WRT54G - URI? I think I'm getting closer to figuring this out ... I just tried Linksys PAP2 and it registered just fine. I looked at the SIP packets captured by ethereal and I discovered that the real problem will probably be the uri in the authorization. For the working Linksys PAP2 and X-Lite I get: Authorization: DIGEST ... uri="sip:asterisk.mydomain.com" ... For the BT100 which doesn't register (403 Forbidden) I get: Authorization: DIGEST ... uri="sip:wan-ip-of-the-router" ... ... this kind of makes sense ... that looks like the wrong uri to send. So for some reason BT100 sends the wrong URI ... how can I fix this?? Again the weird thing is that if I plug in the BT100 behind any other router then Linksys WRT54G everything works fine. I'm trying my BT100 with the following config: - SIP Server: asterisk.mydomain.com - Outgoing Proxy: asterisk.mydomain.com - Nat travelsal: no - Local sip port: 5060 - Use NAT ip: no - Proxy require: no And in my sip.conf I have Nat=yes Qualify=yes -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tomas Florian Sent: Saturday, April 23, 2005 11:04 PM To: 'Pedro'; 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] SIP registration behind Linksys WRT54G Yes that's the first thing I tried ... I'm able to make it work (using different routers than Linksys) in the following ways: - Set outgoing proxy and no STUN OR - No outgoing proxy and set STUN But once I put it behind Linksys everything registration does not work any more. Tomas -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Pedro Sent: Saturday, April 23, 2005 10:32 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] SIP registration behind Linksys WRT54G Have you tried to enable NAT translation on the Grandstream? On 4/23/05, Tomas Florian <[EMAIL PROTECTED]> wrote: > I'm trying to register BT100s ... (doesn't work) > X-Lite seems to work though > > Tomas > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Mojo-Jojo > Sent: Saturday, April 23, 2005 8:48 PM > To: Luki; Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] SIP registration behind Linksys WRT54G > > Oh yeah, duh.. Forgot.. I also have an SPA-2000 and a Cisco ATA-186 running > behind my Linksys WTR43GS with no issues. This is at home registering to an > external * box and to vonage. > > ----- Original Message ----- > From: "Luki" <[EMAIL PROTECTED]> > To: "Asterisk Users Mailing List - Non-Commercial Discussion" > <[email protected]> > Sent: Saturday, April 23, 2005 9:41 PM > Subject: Re: [Asterisk-Users] SIP registration behind Linksys WRT54G > > The WRT54G work fine... > > I have a Sipura 1000 and a Grandstream 286, both nated through a > WRT54G on a single public IP. Worked "out of the box" -- no special > settings needed. I was even surprised that I did not need to turn on > the NAT handling in the Sipura ATA. > > Then I have a WRT54G running as a wireless client, and a Sipura 1001 > connected to it, essentially behind two NAT's. Works fine too. > > --Luki > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
