Mark Johnson wrote:
Michael Welter wrote:
Try 'vmstat 1'--are you getting 40% "system" utilization every <n>
seconds? If so, unload the wcfxo and wcfxs modules and test again.
I tested and I do in fact get from 40-50% system util every 5 seconds or
so. After removing the wctdm module, the system util drops to 0 and
stays there. I have not loaded the wcfxs and wcfxo modules because I
could never get them to work right. I instead load the wctdm and it has
seemed to work fine. I only need to make the fx port to the paging
system work and the others can stay idle. What modules and order so you
suggest. Here is what I load in this order:
wct4xxp
wctdm
Do you still have the static on the PRI without the TDM modules?
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
