>-----Original Message----- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] Behalf Of Andrew >Kohlsmith >Sent: Monday, April 25, 2005 8:04 AM
<snip> >Channel banks are great; the better ones (Adit600) can do far-end >disconnect >supervision and I think pretty much all of them do dynamic impedance >adjustment, meaning they're FAR less prone to echo. Just about >anyone's FXS >modules work, but be careful with FXO modules on channel banks. >Access Bank >I and IIs do *NOT* do far-end disconnect, meaning if someone on the other >side hangs up, Asterisk won't be able to tell. Andrew, What configuration do you need to do to the Adit in order to get it to recognize FXO side disconnect? I have tried a number of different settings and can never get it to pass through to *. I am configured with 2 FXS cards and 1 FXO. My FXO card is running SW ver. 1.12 and my Mainboard is at ver. 7.0.3. I am using POTS lines from SBC. My lines are getting a loop drop as I have done some testing with Voicetronix OpenSwitch cards and they do see the disconnect. Any suggestions would be appreciated. Karl Putz > _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
