On Sat, 29 Jan 2005, Greg Boehnlein wrote: > Hello, > I'm looking at building a couple new PRI Gateway boxes using > TE405P cards, and was wondering if anyone has had any experiences (good or > bad) with the Intel SE7210TP1_E motherboards from Intel. General Technics > builds some really nice (and cost effective) 1U servers based on the > board: > > Server: http://www.gtweb.net/gt637.html > > Specs: http://www.gtweb.net/support/pdf/SE7210TP1-E_Product_Brief.pdf > > Comments?
Per my other costs, I've settled on the following box from General Technics for my PRI gateway boxes. http://www.gtweb.net/gt637.html I had a pretty detailed conversation with Chris from GT about the board and how it is laid out, and it appears that the unit has several PCI busses in it and they are separated nicely; The only stuff on the 5V PCI slot is a 10/100 NIC + the Video. Since there is a Gig-E that shares the same bus w/ the SATA drive I can just use that and keep the bus free for the TE405. On most of my boxes, I disable the Video and use serial console. I'll keep people up to speed on how this works out. -- Vice President of N2Net, a New Age Consulting Service, Inc. Company http://www.n2net.net Where everything clicks into place! KP-216-121-ST _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
