I think you will find it is pin reversed..... So flip the RJ45 Over Dave
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Gregory Junker Sent: Thursday, 28 April 2005 4:29 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] RJ45 to RJ11? Connect the POTS pair to pins 4 and 5 in the RJ45, and you should be fine (I say this not having looked at the TDM400 specs, but from the perspective of standard wiring practice and the assumption that Mark et al followed same). Greg Paul Shiflet wrote: >I just received my TDM400 card from digium with 2 fxo and 2 fxs >interfaces. They are all RJ45 ports as opposed to RJ11 like my POTS >phones. How do i interface my POTS phones with this; can i just crimp >an >RJ45 connection on the end of the phone cord? > >Paul > > >_______________________________________________ >Asterisk-Users mailing list >[email protected] >http://lists.digium.com/mailman/listinfo/asterisk-users >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.10.3 - Release Date: 25/04/2005 _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
