On Wed, 27 Apr 2005, Dan Morin wrote: > To expand upon my original question, does anyone know of any devices > that would make connectivity between the Panasonic system and Asterisk > possible? What are opinions of using FXS ports in Asterisk going into > to CO ports on the PBX? Or if I'm putting money into the problem, how > would I go about setting up a PRI connection between the two? A PRI > connection would give me 20 odd lines correct?
What kind of CO lines does your current setup use? Standard pots lines, cahnneliazed (non-isdn) T1 with rbs, isdn bri, tie-lines or something else? A T1 PRI card will give you 23 lines between the panasonic KX-TD1232 and Asterisk, an E1 PRI card will give you 30 lines. BRI or PRI is really the best way of interconnecting Asterisk and the pbx. A new PRI card should cost about $1000-$2000. Make sure you get a PRI T1 card and not a non-isdn T1 card. If the KX-TD1232 uses BRI CO lines they can be used instead. It may be hard to obtain BRI cards in the USA. Peter _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
