yes, some multiplexer allows that, but they're quite expensive compared to another E1 card for asterisk. I think you'll need at least 1k $$$ for a such splitter.
Matteo, would you have any reference for this 'mux/splitter' ?
I would guess it need to be smart enough to dig into the signalling, since is not only the PCM DS0s that would need to be "Y-splitted".
[], <O-O>
Il giorno ven, 29-04-2005 alle 17:33 +0200, [EMAIL PROTECTED] ha scritto:
Hi,
Assume I have one E1 digium card to which I want to plug two distinct E1 PABXs , one with 15 channels and the other with 15 channels;
Is there a sort of E1 multiplexer devise that allows me to plug in one hand the E1 port of the Digium card and on the other hand the two PABXs? In this same devise, I should be able to say that 15 channels need to go to first Interface and 15 other channels need to go to other interface.
Or is it necessary to acquire a another E1 card although I don't need to process more channels (30 channels are ok).
Any help is greatly appreciated.
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
