Many channel banks have two T-1 connectors and support a feature called 'drop and insert'. This allows some of the DS0 channels to be cross connected from one T-1 connection to the other. The first T-1 connection can go to the telco or an interface card in a computer, and the second T-1 can go to another channel bank. Some of the channels can be dropped off at the first channel bank while the rest can continue on to the second channel bank. You are asking about E-1 and PBX instead of T-1 and channel bank, but if I understand the 'drop and insert' correctly, and if your hardware supports it, this may work for you.
> Il giorno ven, 29-04-2005 alle 17:33 +0200, [EMAIL PROTECTED] ha scritto: > >>Hi, >> >>Assume I have one E1 digium card to which I want to plug two distinct E1 PABXs , >>one with 15 channels and the other with 15 channels; >> >>Is there a sort of E1 multiplexer devise that allows me to plug in one hand the >>E1 port of the Digium card and on the other hand the two PABXs? In this same >>devise, I should be able to say that 15 channels need to go to first Interface >>and 15 other channels need to go to other interface. >> >>Or is it necessary to acquire a another E1 card although I don't need to process >>more channels (30 channels are ok). >> >>Any help is greatly appreciated. _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
