what sort of level of PC is required for 300 concurrent calls? Regards David
On 5/1/05, Hakem Taourchi <[EMAIL PROTECTED]> wrote: > > > > Can this Dell run 90 calls simultaneously ? Or need a higher Dell machine? > > > > > > -----Message d'origine----- > De : [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] De la part > de Ariel Batista > Envoyé : samedi 23 avril 2005 1:27 > À : 'Ben Hencke'; 'Asterisk Users Mailing List - Non-Commercial Discussion' > Objet : RE: [Asterisk-Users] Dell PowerEdge SC1425 w/ TE405P? > > > > > I just setup a SC420 with two TDMO4b cards in it and it works just fine. No > problems what so ever with it so far. > > > > ________________________________ > > > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf > Of Ben Hencke > Sent: Friday, April 22, 2005 6:42 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] Dell PowerEdge SC1425 w/ TE405P? > > > > I have head that the SC prefixed Dells are not good to use with Digium > hardware. Considering how picky my TE405P cards were in other low end Dell > servers, I would suggest using an 1850 instead. > > OTOH, if it does work, please let me know :-) > If you go to small biz, you can get the SC1425 trimmed down with dual > 2.8hgz for under $1k > - Ben > > > On 4/22/05, Greg Boehnlein <[EMAIL PROTECTED]> wrote: > > Hello, > I've been asked to build a couple of Gateway servers for a client > w/ TE405P hardware, and have been looking around at various 1U options. > I've been looking at SuperMicro and Tyan barbones boxes as possible > platforms, but then was directed to Dell's SC1425 by a friend. Short > story, is that you can purchase a 2x3.0Ghz/1GigDDR400/1xSATA box in a 1U > form factor for $1,498.00. This seems almost too good to be true, so I'm > asking if anyone has had any experience with this box? > > I'm not up on my PCI terminology, but as I understand it, the TE405P can > only be used in a 32 bit 33Mhz slot at 5.0 Volts. This SC1425 lists a > "1x 64-bit/1xxMHz PCI-X slot" under it's expandability information. I'd > venture to guess this is probably NOT going to work with a TE405P. > > That being said, if it works, great. If not, what 1U boxes are people > using IN PRODUCTION w/ TE405P cards? > > -- > Vice President of N2Net, a New Age Consulting Service, Inc. Company > http://www.n2net.net Where everything clicks into place! > KP-216-121-ST > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users