On Mon, May 02, 2005 at 01:02:34PM -0400, Mehmet Tolga Avcioglu wrote: > I can't seem to be able to make outgoing calls with X100P card. I can > receive calls fine and it picks up the line and sends the tones, but the > telco doesn't recognize them. While the tones are sent I continue to > hear the dial tone on the line when I pick up a parallel. I also cannot > dial from the parallel until X100P hangs up the line.
I had the same trouble, here in the UK. What do you have rxgain and txgain set at in zapata.conf ? I found I had to raise the txgain to 0.25 to get it to work on my British Telecom line (Cable Provider's line was fine) I also had to up even further (to 3.0) in order to get inbound fax to work, although I think I can back that off a little. Of course, increasing the gain also gives me an echo issue, in proportion to the gain values, so I suspect I have an impedance issue. YMMV of course. Hope that Helps Iain _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
