Joseph, Thanks for your comments. I did have the phones in a group from some testing I was doing, which I have since removed.
The phone reports call_waiting : 1 when I telnet in and check the config. Is this the correct setting or should it be set to 0? With the group config removed it still looks like I'm getting sent to voicemail rather than having secondary calls "roll over." I'm working remotely and not near the phone, but if I call into my DID on two phones, one rings and the other goes immediately to voicemail. Again, thanks for your help! Pat Quoting Joseph <[EMAIL PROTECTED]>: > On Tue, 2005-05-03 at 08:25 -0400, Patrick M. Gray, Jr. wrote: > > My 7960 doesn't behave this way. With all usernames/display > names/extensions > > the same, a second incoming call goes directly to voicemail. I'm on SIP > > firmware 7.1... could that be part of the problem or is it likely something > in > > *? > > > 7.1 should not matter. > > Is call waiting turned on? > > Make sure that SIPDefault.cnf and your SIPMAC.cnf don't have some > setting making it behave that way. > > What do you see if you telnet to the phone, and do a show config? > Are the lines all set the same? > > You are not doing something with SetGroup/CheckGroup are you, in your > dialplan? > > > -- > respectfully, Joseph =============== > ---------------------= ********** = > > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
