> Not that I know of, just the standard RHEL 4 advisories. I suspect the TDM > card may be broken. Before I rebooted the leds of both ports were lit, > just the FXS port was dead. > > I rebooted to see if it would help, it didn't. Now when I load the driver > it gives some sort of message that it couldn't initialize port #1. The > console suggests to verify whether the power cable is plugged in to the > TDM (it is, i checked). > > Disabling the FXS port works, the driver will then initialize and asterisk > will start (obviously without FXS port). > > I can use the PSTN line on the TDM card for inbound/outbound calls, I > guess if it really were a power problem then the FXO port wouldn't work > either?
Looks to me your FXS port is broken. I still have to order my first digium card so cannot tell you 100% sure, but seems like it. (The Digium card will be ordered as soon as OpenBSD support is there) -- Michiel van Baak http://lunteren.vanbaak.info [EMAIL PROTECTED] GnuPG key: http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x7E0B9A2D "Two of the most famous products of Berkeley are LSD and BSD. I don't think that this is a coincidence." _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
