Andrew, Thanks for ur response. Hmmm, But I will have a bandwidth issue if I use ulaw. 20 calls at the same time... 512 connection can't support that... What do u think? The only reason I'm using iLBC is bcz of the Bandwidth. What about the packet lost, I see some packet lost... What is the best way to configure * if there are some packet losts ?
Thanks David Senior Network Administrator Call Center Development Services (t) 514.731.5046 ext. 226 (f) 514-731.5834 (m) 514.814.0203 (e) [EMAIL PROTECTED] (w) www.ccds.ca -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Andrew Latham Sent: Tuesday, May 03, 2005 1:57 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Voice Quality allow=ulaw or allow=gsm is all you need at both locations. On 5/3/05, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > Hello, > > I have setup two * servers and they are communicating using IAX. I'm > passing calls from SRV A (internet connection T1) to SRV B (internet > connection: 512). > > For some reasons I have an issue with the quality. The voice is a bit > scratchy. I have tried iLBC and SPEEX, but it didn't make any difference. > > Now, assuming that I have an issue with Bandwidth, what would be the > best way to configure my iax.conf. (A bit confused about jitterbuffer > and tos) > > Here is my iax.conf @ location A: > > [general] > port=4569 > bandwidth=low > disallow=all > allow=ilbc > ;allow=ulaw > ;allow=speex > jitterbuffer=200 > jitterbuffer=yes > tos=lowdelay > > and iax.conf @ location B: > > [general] > port=4569 > bandwidth=low > disallow=all > allow=ilbc > ;allow=ulaw > ;allow=speex > jitterbuffer=200 > jitterbuffer=yes > tos=lowdelay > > [guest] > type=user > context=default > callerid="Guest IAX User" > disallow=all > allow=ilbc > > Thanks guys > > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -- <sig> Andrew Latham - AKA: LATHAMA (lay-th-ham-eh) WWW: http://lathama.com Email: [EMAIL PROTECTED] - [EMAIL PROTECTED] - [EMAIL PROTECTED] If any of the above are down we have bigger problems than my email! </sig> _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
