Hi all!
I have got same problem with Sangoma A102 and didn't get how did you fix a problem? Can anybody explain?
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Vikram
> Rangnekar
> Sent: Tuesday, February 15, 2005 1:59 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: [Asterisk-Users] Re: Sangoma A102 cards testing FIXED
>
> Its fixed and working great.
> >
> > I was working on the dma issue that nenad pointed out and when i tried
> > to hdparm -d 1 /dev/hda my harddisk i got a permissioned denied error
> > (I was root) So i started researching a bit more and realised that
> > since i have a sata hdd and running it in IDE mode i cant start dma so
> > i just recompiled the kernel with sata drivers and scsi activated then
> > i change the bio SATA setting to SATA ENHANCED (nothing else seems to
> > work) and changed the root=/dev/hda2 to
> > root=/dev/sda2 in the kernel boot options and i was on my way. now
> > when i tierd hdparm -d 1 /dev/sda i was told that scsi dosent have dma
> > so it didnt matter.
> >
> > Next i started the wanpipe drivers and started asterisk i didnt get
> > any errors so to test th config i used
> >
> > exten => 111,1,Dial(Zap/g1/301)
> > exten => 111,2,Hangup
> >
> > and dialed that extension 111 and the extension 301 rang. i had
> > started pri intense debugging and used show channels to make sure the
> > call went over the e1 channels.
> >
> > i'm still testing it, it seems to be working great right now only
> > error i got was a FCS BAD or somthing like that once.
> >
> > My motherboard is a SuperMicro P4SCI just for your information.
>
br,
dmitry
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
