Hello,
Haven't had a chance to test this configuration yet, so I can't
really answer my own question, but wanted to get a couple of eyeballs to
look at it and verify that I'm going to get the behavior that I expect out
of it. Basically, I have a TE405P w/ 3 PRI to the Telco and one going to a
legacy PBX, all speaking NI-2 (National ISDN 2). I need to use "pri_cpe"
w/ the Telco and "pri_net" for the PBX, and I want them in different
groups. I hacked the following up last night, while falling asleep, and
I'm pretty sure it will do what I want, but I'd like a second opinion.
; Zapata telephony interface
;
; Configuration file
[channels]
; Inbound PRI from Telco
context=inbound
switchtype=national
signalling=pri_cpe
group=1
channel => 1-23,25-47,49-71
; Outbound PRI to PBX
context=pbx
switchtype = national
signalling = pri_net
group = 2
channel => 73-95
Thanks..
--
Vice President of N2Net, a New Age Consulting Service, Inc. Company
http://www.n2net.net Where everything clicks into place!
KP-216-121-ST
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
